Epistula · The Mail Server

Epistula - WebMail · ActiveSync · WebDAV · SMTP · IMAP

(Free Personal License for up to 5 users)

Works with:

Any IMAP and WebDAV client eM Client, MailBird, Zimbra, Thunderbird or Microsoft Outlook
Any ActivSync client like iPhone and Android
Any modern Web browser like Chrome, Firefox or Safari

Benefits:

Supports CalDAV (Calendar) and CardDAV (Contacts)
Supports ActivSync for E-Mail, Calendar, Task, Notes and Contacts
Runs as a service
Encrypts communication using SSL/TLS
Supports Email Address Internationalization (EAI)
IPv6 aware

System Requirements

Windows 2003-2022 or Windows XP/Vista/7/8/10/11

Linux with WINE

Installation

Run Setup.exe or create a directory on your machine and copy all the files into this directory.

Start MBServer.exe and point your browser to http://localhost:8080 to configure Epistula.

Default user is admin with password admin

Run Epistula as a service

Once you run Epistula as a service, errors will only be visible in the logfile or in the main window of MBAdmin. Consequently, before running it as a service you must first ensure that Epistula is running properly with no errors by launching it in Console Mode (i.e. starting it from an icon).

In general, installing Epistula as a service should be your last task and not your first.

Note: Keep in mind that Epistula needs to reside on a local disk or the service controller will not be able to start it. Also make sure MBAdmin.exe and MBServer.exe are in the same directory.

Install the service using the GUI

Start MBAdmin, select View->Service and here you can install, remove, start and stop the service. By default it is an AutoStart service and any time your computer is started, Epistula will start.

Note:After you have started Epistula as a service, verify that Epistula has no errors. You need to take a look into the logfile to do this or start MBAdmin and in the main window you see the logfile.

Install the service from the command line

Open a DOS box and change to the directory where Epistula is installed (usually C:\POPBeam or C:\Program Files\Epistula)

Installing Epistula as a service

Start MBServer.exe with the argument of install, by typing

MBServer install

at the command prompt and Epistula will create the service. By default it is an AutoStart service and any time your computer is started, Epistula will start. You can start and stop Epistula at any time via Control Panel

Note: After you have started Epistula as a service, verify that Epistula has no errors. You need to take a look into the logfile to do this or start MBAdmin and in the and in the main window you see the logfile.

Removing Epistula as a service

Start MBServer.exe with the argument of remove, by typing

MBServer remove

at the command prompt and Epistula will delete the service.

How to Stop Epistula

Epistula runs as a console application

Press ESCAPE

Select Close from the system menu

Press Alt-F4

Epistula runs as a service

Open Control Panel, select Services, locate Epistula and press the button labeled Stop

Type

net stop Epistula

at the command prompt

Upgrade to the latest Version

You will find the latest version of Epistula at our Download Center.

setup_smtpbeamer_??.exe searches for a previously installed Epistula and updates only the executable files. The settings, which are stored in smtpbeam.ini and *.dat, are not touched.

If the Epistula service is running, it is stopped and restarted after the update. In the unlikely event that a executable is locked, the setup program asks for a reboot to change the file. If you refuse the reboot, you need to manually reboot later to bring the new executable into affect.

Note: If you are upgrading from a very old version then you must reapply your registration number.

More about MX Records

The following information is intended for the DNS administrator:

The MX resource record provides the ability to publish mail routing information using DNS.

This is useful for several reasons: MX records allows multiple hosts to accept mail on behalf of a single host. If the destination mail server is down or otherwise off-line, then one of the other mail servers can accept mail on that system's behalf. When the destination system is brought back on-line, the secondary mail servers will forward the mail to it. MX records allow multiple hosts to accept mail on behalf of a domain.

Rather than address mail to user@host.domain.com, you can simply send mail to user@domain.com. The MX records tells external mail servers which internal mail servers to use for mail that is addressed to @domain.com.

The format of the MX record differs slightly from the format of an A record. Rather than use IP addresses, the MX record uses the host names instead. Also, an additional field provides an ability to set preferences for which hosts are the end-targets.

For example, the following MX resource record indicates that all mail addressed to user@domain.com should be sent to SMTPBeamerMachine, and then to AnotherHost if SMTPBeamerMachine is unreachable:

domain.com 
IN MX 10 SMTPBeamerMachine
IN MX 20 AnotherHost

Note: Under no circumstances should you use MX records in conjunction with CNAME alias records. This will confuse many mail servers on the market, preventing you from receiving mail from those systems and it also violates RFC974.

Helper Programs

Signal is a command line program that allows you to perform the same commands as from the Signal menu of MBAdmin. You can force the download of POP3 messages by simply clicking on a link rather than starting MBAdmin.

LogView allows you to view the logfile in real time from any machine on your network. This is especially useful if MBServer runs as a service.

TestMX is a command line program to resolve the MX record for a give domain and then connect to the mail server. The main purpose is to troubleshoot MX related problems or to check if a domain can accept messages.

CSVToEnv is a command line program to recreate the envelope from the statistic file. CSVToEnv is needed to resend messages from the history folder.

TLS/SSL Toolkit contains a generic certificate that you may use for a quick start. Download TLS/SSL Toolkit and extract tlscert.pem and cacert.pem into the XWall directory and then turn on TLS/SSL.

SerializeLog by Softec Integrations AG is a command line program to serialize the XWall logfile to facilitate troubleshooting.

Licensing Agreement

Epistula ® is copyrighted 1993-2015 by DataEnter GmbH

This product and its documentation may not, in whole or in part, be copied, rent, leased, loaned, resold, assigned, sublicensed, modified, reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any other natural or computer language, in any form or by any means whatsoever, be it electronic, mechanical, magnetic, optical, manual or otherwise, without the prior written consent of DataEnter.

DataEnter makes no warranty or representation, either expressed or implied, with respect to the product Epistula and its documentation, their quality, performance, merchantability, or fitness for a particular purpose. DataEnter reserves the right to revise the user's guide and make changes to the content without obligation to notify any person or organization of such change. In no event will DataEnter be liable for any direct, indirect, special, incidental or consequential damages, real or imagined, resulting from the use or purchase of this software. Under no circumstances shall DataEnter's liability for damages exceed the price paid for the software license. Should any remedy hereunder be determined to have failed, all limitations of liability and exclusion of damages set forth above shall remain in full force and effect. The extent of the DataEnter's warranty for the software and its documentation is limited to physical defects of the distribution media containing the software. Contact DataEnter to obtain return authorization for the replacement diskette within 30 days of the original date of purchase. Any further statement made by agents, employees, distributors or dealers of DataEnter do not constitute warranties and are not binding. No employee of DataEnter has the authority to modify any portion of this warranty.

All brand and product names we refer to in the documentation are used solely for identification purposes and may be trademarks of other companies.

DataEnter, (the licensor) grants the buyer (the licensee) the right to use this copy of Epistula (the program) on a single computer at a single location as long as the licensee complies with the terms of this license. The licensor reserves the right to terminate this license if the licensee violates any part of the agreement. The licensee agrees to make copies of the program only for backup purposes. The licensee agrees not to copy the documentation and to take all necessary precautions to ensure that the backup copies of the software are not distributed to or acquired by other parties.

 
History

v3.62 2025-04-17

  • Chg: OpenSSL updated to v3.3.1
  • Fix: Web: URL in a message opens in a new tab
  • Fix: Web: Progress bar when sending a message over 20k
  • Fix: IMAP LIST ignores non-ASCII mailbox
 
 
©1991-2026 DataEnter GmbH
Wagramerstrasse 93/5/10 A-1220 Vienna, Austria
support@dataenter.co.at
2026-11-19 / Phone
2026-11-19 / Tablet
Changed: 2026-11-19
Server
Desktop
Copyright ©1991-2026 DataEnter GmbH
Wagramerstrasse 93/5/10 A-1220 Vienna, Austria
Fax: +43 (1) 4120051
support@dataenter.co.at